This is the "Air" wheel set for the Full-size Mud Duck MkII (108") and Agri-Duck (110") versions of the Duck designs. (The Sport designs use a 7.5" innertube, but you could go oversize if you wanted to.)
These are unassembled and come with:
- (2) cardboard tubes
- (4) light-ply discs
- (2) brass bearings
- (2) innertube tires
- (4) Hitch Pins
You just need to supply the glue.
Please Note: Innertubes are designed to be used "in" a tire where bulging or deformities is never an issue as long as they are holding air and not leaking. Due to this Quality Control does not check for uniform wall thickness of the tube.
When a tube is inflated the thinner portions of the tube will begin to stretch easier or "bulge". From experience this size tube will result in a 9" diameter before bulging is evident.
This is typically a trend from lot to lot. We can not guarentee you will receive innertubes that will inflate perfectly to 10", but we will guarentee 9". (FYI: 9" is not that obviously different from 10" on a Mud Duck).
This product was added to our catalog on Sunday 28 September, 2008.
