Main Content:

Pages: [1]

Boeing B-9 Bomber- various materials

0 Members and 1 Guest are viewing this topic.
Boeing B-9 Bomber- various materials
« on: July 05, 2009, 03:05:59 PM »

Hello everyone, I was introduced to this site by Airboatflyingshp of RCGroups (don't know if that's his username here) as a place where I should share my B-9 build.

I began building this B-9 last Thursday out of cardboard, FFF, and foamcore board, when I saw another member on RCGroups getting ready to do it. It sounded like an easy plane to model and fortunately, it was! The dimensions were decided by the other member and I decided to match them.

Wingspan 84 inches. Length about 55 inches. AUW will probably differ due to different materials being used, but my AUW is looking like a good 8 pounds! (alot for me). Here is a link to the build of my B-9 with pictures (I use the same username there as here).

http://www.rcgroups.com/forums/showthread.php?t=1048287

Just look for the posts by greenseaships

Hope you enjoy all!

Barrett
  • Mud Duck Aviation
  • Administrator
  • Super Contributer
  • *****
  • Karma: 1
  • Offline Offline
  • Posts: 199
  • Build Fast!! Fly Slow!!
  • WWW
Re: Boeing B-9 Bomber- various materials
« Reply #1 on: July 11, 2009, 08:49:32 PM »

Barrett,

 By all means, feel free to post your build(s) here to share your methods working with foamboard and results of what can be done, I'm sure our members will appreciate the information.

Greg

Greg Drusjack
Owner
Mud Duck Aviation, Inc.
Smiley
Pages: [1]
Jump to: